Redmi Reset

How To Hard Reset Redmi 9C NFC

Here you can learn how to hard reset the Redmi 9C NFC Android mobile. You can unlock your mobile when you forget your mobile password with these methods.

Some reset methods deletes all your mobile data. So read carefully before reset your mobile.

What is Hard Reset?

A Hard reset is a software restore of an electronic device to its original system state by erasing all of the data that were previously stored on the device.

Here is the detailed guide about Hard Reset

If you have any other problems check out this page Redmi 9C NFC Troubleshooting

Hard Reset Redmi 9C NFC with Recovery Mode

You can hard reset your Redmi 9C NFC mobile with recovery mode without any software or tools.

This Hard reset method will delete

  • Photos, videos
  • Contacts
  • Installed apps and settings etc.

The following tutorial shows all the steps of master resetting Redmi 9C NFC.

Step 1: Use the Power key to disable the phone.

Step 2: Then hold down the Volume Up and Power keys together.

Step 3: Release the held button when Recovery mode shows up.

Step 4: Here, use the Volume rocker to navigate and the Power button to select. Move to the Wipe Data, where pick the Wipe All Data.

Step 5: Choose the Confirm position to begin the process. When the hard reset is completed, use the Back to Main Menu tab.

Step 6: Finally, turn on the phone by using the Reboot → the Reboot to System.

Step 7: Successfully completed reset your mobile.

Hard Reset Remotely with Google Find My Device

If you lose your Android device, you can easily find your device if you turn on the Google Find My Device option.

To lock erase or Reset an Android device remotely, make sure that mobile:

  • Has power on
  • Is connected to mobile data or WiFi
  • Is signed in to your Google (Gmail) Account
  • Has Find My Device turned on
  • Is visible on Google Play

Note: If your mobile is off or is not connected to mobile data or WiFi, you may still find its most recent location if you’ve enabled the Store recent location option.

Steps to Erase Device Remotely:

  • Take another mobile or Computer and on a browser, go to android.com/find.
  • Sign in with your Google account which is used in your lost mobile.
  • The lost device gets a notification.
  • Now, You can see your device location (The location is approximate and may not be accurate).
  • If you get a prompt on the screen, tap Enable lock & erase.
  • Now you can see three options on the screen. 1. Play sound, 2. Secure device, 3. Erase device.
  • Select what you want to do.
  • Use the erase device option to reset your mobile.

Here is the detailed information about Google Find My Device.

Hard Reset with third-party software

If the above method is not working, you can use some third-party apps to reset or unlock your device.

Here we provide the best software to Reset and unlock your Android mobile.

Check out this link for Best Software’s for Android Mobile Hard Reset.

Additional Information

Backup Important Data: Before initiating a factory reset, it’s crucial to back up any essential data such as contacts, photos, videos, and documents. This ensures that you don’t lose any important information during the reset process.

Battery Level: Ensure that your device has sufficient battery charge before starting the reset process. It’s recommended to have at least 50% battery to avoid any interruptions during the reset.

Google Account: If your Redmi 9C NFC is associated with a Google account (for Android’s Factory Reset Protection), you may need to enter your Google account credentials after the reset to activate the device.

Reset Time: The factory reset process may take several minutes to complete, depending on the amount of data on your device. Be patient and avoid interrupting the process once it has started.

Reset Options: In some cases, you may have slightly different options in the recovery menu depending on the specific firmware version or updates applied to your Redmi 9C NFC. Follow the on-screen instructions carefully if you encounter any variations.

Factory Reset Settings: After completing the factory reset, you will need to set up your Redmi 9C NFC again as if it were a new device. This includes language selection, Wi-Fi setup, Google account login, and other initial settings.

FAQ – Frequently Asked Questions

1. How do I put my Redmi 9C NFC in recovery mode?

Press the Power key to turn off the mobile. Then hold the Volume Down and Power buttons for a couple of seconds. Let go of the Power key when the Redmi logo shows up. Release Volume Up if Recovery Mode pops up. Now choose Wipe Data. Use the Volume keys to scroll down and the Power button to accept it.

2. What is NFC used for?

NFC, or Near Field Communication, is a technology that allows devices to communicate with each other when they are placed close (usually within a few centimeters). It enables quick and easy communication between devices, typically for the following purposes: Contactless Payments, Data Transfer, Access Control, Ticketing, Smart Objects Interaction, and Pairing Devices.

Resources

Recent Posts

Best Samsung FRP Bypass Tools

Samsung FRP lock is a security feature that prevents unauthorized access to your device after…

4 months ago

Best FRP Bypass Tools for PC

Are you looking for a tool that can provide instant Android screen lock removal or…

4 months ago

Panasonic Eluga Ray 810 Flash File

The firmware helps in unlocking the device, updating the device to the latest android version,…

5 months ago

Secret Codes Motorola Moto G Power (2022)

Right here you can get all Motorola Moto G Power (2022) secret Codes and a…

5 months ago

Hard Reset vivo Y72 5G

Here you can know vivo Y72 5G hard reset method, factory reset method, Reset with…

5 months ago

Unlock Any Doogee Android Phone – Forgot Password

Here you can know the Doogee Unlock methods, Hard reset method, Unlock with Google find…

5 months ago