Here you can easily Fix Brightness Problem in Ericsson Phone.
Fix Brightness Problem in Ericsson
If you’re experiencing brightness issues on your mobile device, here are some steps you can take to address the problem:
- Check the Brightness Slider: Ensure that the brightness level is not set too low. Swipe down from the top of your screen to access the notification panel, and then adjust the brightness slider to a higher level.
- Restart Your Device: Sometimes, a simple restart can resolve software-related issues, including brightness problems. Turn off your mobile device, wait a few seconds, and then turn it back on.
- Battery Saver Mode: If your device is in battery saver mode, it may dim the screen to conserve power. Check if your battery saver is enabled and disable it if necessary.
- Check for Software Updates: Manufacturers often release software updates that can address various issues, including brightness problems. Check for any available updates and install them if needed.
- Check Display Settings: Go to your device’s Settings and then look for the Display or Brightness settings. Depending on your device, you may have options like Adaptive Brightness, Night Mode, or Blue Light Filter that could affect the brightness. Adjust these settings as required.
- Disable Auto Brightness: If Auto Brightness is enabled, your device will automatically adjust the brightness based on ambient light conditions. Sometimes, this feature may not work correctly, leading to brightness problems. Try disabling it and manually adjust the brightness level.
- Safe Mode: Boot your device into Safe Mode to see if any third-party apps are causing the issue. In Safe Mode, only the pre-installed apps are allowed to run, so if the brightness problem doesn’t occur in Safe Mode, an installed app may be the culprit.
- Reset Display Settings: If none of the above steps work, you can try resetting your display settings to their default values. This can often fix any misconfiguration causing the issue. Go to Settings > Display > Advanced (or similar) and look for a “Reset” or “Restore defaults” option.
- Factory Reset: As a last resort, you can perform a factory reset on your device. This will erase all data and settings, so make sure to back up your important data first. Go to Settings > System > Reset > Factory data reset (or similar) to initiate the process.
If you’ve tried all these steps and the brightness problem still persists, it’s possible that there could be a hardware issue with your device. In that case, consider contacting the manufacturer’s support or visiting an authorized service center for further assistance.