How To Hard Reset Redmi K40

Here you can learn how to hard reset Redmi K40 Android mobile. You can unlock your mobile when you forget your mobile password with these methods.

Some reset methods deletes all your mobile data. So read carefully before reset your mobile.

What is Hard Reset?

A Hard reset is a software restore of an electronic device to its original system state by erasing all of the data that were previously stored on the device.

Here is the detailed guide about Hard Reset

If you have any other problems check out this page Redmi K40 Troubleshooting

Hard Reset Redmi K40 with Recovery Mode

You can hard reset your Redmi K40 mobile with recovery mode without any software or tools.

This Hard reset method will delete

  • Photos, videos
  • Contacts
  • Installed apps and settings etc.

The following tutorial shows all the steps of master resetting the Redmi K40.

Step 1: First of all, turn off the phone by pressing the Power button for a short while.

Step 2: Then hold down the Volume Up and Power keys together.

Step 3: When the Redmi logo appears let go of the Power button.

Step 4: Release Volume Up if Recovery Mode pops up.

Step 5: Now choose Wipe Data. Use the Volume keys to scroll down and the Power button to accept it.

Step 6: After that select Wipe All Data and Confirm.

Step 7: Go back to the Main Menu and select Reboot.

Step 8: Finally, choose Reboot to System with the Power button.

Step 9: Successfully completed reset your mobile.

Hard Reset Remotely with Google Find My Device

If you lose your Android device, you can easily find your device if you turn on the Google Find My Device option.

To lock erase or Reset an Android device remotely, make sure that mobile:

  • Has power on
  • Is connected to mobile data or WiFi
  • Is signed in to your Google (Gmail) Account
  • Has Find My Device turned on
  • It is visible on Google Play

Note: If your mobile is off or is not connected to mobile data or WiFi, you may still find its most recent location if you’ve enabled the Store recent location option.

Steps to Erase Device Remotely:

  • Take another mobile or Computer and on a browser, go to android.com/find.
  • Sign in with your Google account which is used in your lost mobile.
  • The lost device gets a notification.
  • Now, You can see your device location (The location is approximate and may not be accurate).
  • If you get a prompt on the screen, tap Enable lock & erase.
  • Now you can see three options on the screen. 1. Play sound, 2. Secure device, 3. Erase device.
  • Select what you want to do.
  • Use the erase device option to reset your mobile.

Here is the detailed information about Google Find My Device.

Hard Reset with third-party software

If the above method is not working, you can use some third-party apps to reset or unlock your device.

Here we provide the best software to Reset and unlock your Android mobile.

Check out this link for Best Software’s for Android Mobile Hard Reset.

Additional Information

Backup Your Data: Before proceeding with a hard reset, it’s crucial to back up your important data such as photos, videos, contacts, and documents. This ensures you don’t lose any valuable information during the reset process.

Charge Your Device: Ensure your Redmi K40 has sufficient battery charge before initiating the reset process. It’s recommended to have at least 50% battery to prevent any interruptions during the reset.

Alternative Method for Recovery Mode: If the method involving the Power and Volume Up buttons doesn’t work, you can try using the Mi Recovery:

  • Turn off your Redmi K40 completely.
  • Press and hold the Power button and Volume Up button simultaneously until the Mi logo appears.
  • Release the buttons to enter Mi Recovery.

Navigating Mi Recovery: In Mi Recovery, use the Volume buttons to navigate through the menu options. Select “Wipe data” or “Factory reset” using the Power button. Confirm your selection by choosing “Yes” or “Confirm” (options may vary based on your device’s firmware version).

Performing the Reset: After confirming the reset, the process will begin. This will erase all data and restore your Redmi K40 to its factory settings. Wait for the reset process to complete. Once finished, you’ll see options to reboot your device.

Reboot Your Device: Select “Reboot system now” to restart your Redmi K40. Your device will boot up into its initial setup screen as if it were brand new.

FAQ – Frequently Asked Questions

1. How do I put my Redmi K40 in recovery mode?

Press the Power key to turn off the mobile. Then hold the Volume Down and Power buttons for a couple of seconds. Let go of the Power key when the Redmi logo shows up. Release Volume Up if Recovery Mode pops up. Now choose Wipe Data. Use the Volume keys to scroll down and the Power button to accept it.

2. Does fastboot delete data?

Fastboot itself does not delete user data. It is primarily used for flashing partitions, installing firmware, or performing other low-level operations on Android devices. However, when you use fastboot commands to unlock the bootloader or flash a new ROM, it typically involves wiping data as part of the process.

Resources

Leave a Reply